Is your pet starting to scratch a lot? Do they seem bothered or irritated for unknown reasons? Chances are during this time of the year; your pet has...
To make sure the quality of our hardware accessories matches the quality of our fencing, we give our staples Class 3 galvanization - double what most manufacturers use. We also finish each staple with a uniformly sharp point for faster driving and the barb cut on each leg helps lock the staple into the post.
The M1000 plugs into a 110 volt outer with 10 stored joules that will power up to 250 acres or 34 miles of multi-wire fence. It also has a Quick scan output voltage that shows the output voltage of the energizer at a glance and a digital output reading. Ideally suitable for large pastures. 2-Year Warranty.
Dare Electric Fence Wire Taps for high tensile or regular electric fence. Use to Connect 12 gauge - 14 gauge fence wire to 12 gauge - 14 gauge hookup wire. The taps are handy when used to connect hook-up, grounding and jumper wires to the fence line. Trouble-free connections can be made quickly and easily. Not a splice. 10 per package.
Dare Wood Post Insulator for Tape 1-1/2" White. Complete with galvanized ring shank nails. For any fence tape up to 1 1/2 inch wide. Insulators grip tape tightly to prevent whipping and sawing. Large flange prevents shorts and arcing.
Dare Wire Dereeler/Spinning Jenny. Knock-down style, equipped with brake to prevent overrunning. Use to spin off coils of high tensile or ordinary fence wire. Accommodates any weight fence wire coil, adjusts to fit 17 inch to 24 inch I.D. coil.
The M150 plugs into a 110 volt outlet with 1.5 stored joules that will power up to 60 acres or 11 miles of multi-wire fence. It also has an indicator light that flashes with every pulse. This unit is ideally suited for small pastures. 2-Year Warranty.
#2576 1-1/2in Polytape x 200 meters / 656ft. Woven of white UV resistance polyethylene and fifteen strong stainless steel conductor wires. 700 lbs. average breaking strength. Highly visible, lightweight and easy to use.
Dare Wood Post Corner and End Tensioner for polytape up to 1 inch wide. Assembled with two triangle grips so that you are able to use in two separate directions. Also use as end connector and gate anchor combination. Suitable as a corner and end. 2 per pack.
Dare T-Post Corner and End Tensioner for polytape up to 1 inches wide. Assembled with two triangle grips so that you are able to use in two separate directions. Fits 1.225 and 1.33 T-posts. 1 per pack.
Dare Wood Post or Vinyl Post Insulator White. Designed for polywire, polyrope, or high tensile wire. Use two galvanized roofing nails for wood post or two 8 x 3/4 inch stainless steel screws for Vinyl
1/2 POLYTAPE INSTALLATION KIT is for use with 1/2 polytape installed on Wood or T-posts. Use to connect charger to tape, form tape gates, end terminals and splices. Consists of: two #2373 electrical connectors, five #2768 buckle/anchors, two #2249 wood post pinlock insulators and two #2550 T-post pinlock insulators.
Dare Wood Post 3-Way Tensioner for polytape up to 1 inch wide. Assembled with three triangle grips so that you are able to use in three separate directions to divide off more pasture area. Grips tape tightly to prevent whipping and sawing
We are constantly adding new specials to our site. Be sure to check back often!